I previously covered our MVHR system and now it’s time to look at the rest of our mechanical setup.
UPDATE – check out our running cost for the first full year
Electrification of Heating
Heating, just like transportation, will be increasingly electrified over the coming years. certainly the ‘Sixth Carbon Budget’ recently published by the climate change committee (December 2020) points to a future where there will be millions of heat pumps installed across the UK, predicting…
…a total of 5.5 million heat pumps installed in homes by 2030, of which 2.2 million are in new homes
Climate change Committee
Hitachi Yutaki heat Pump
There seemed little point in fitting another oil or gas fired boiler, in fact we chose not to burn anything anymore.
So the new Automated home is heated using this 11kW Hitachi Yutaki M Monobloc Air source heat Pump. This air to water unit supplies the Roth underfloor heating system on both floors as well as the 300 litre Joule Cyclone DHW tank.
There is plenty of FUD circulating on forums and Facebook groups about heat pumps. lots of ‘expert’ opinions from people that have never owned one or lived in a house with one. While there are unquestionably horror stories out there (as with every trade), a correctly spec’d heat pump, developed and installed by a real expert company like Daly Renewables, in a well insulated airtight house is an efficient solution.
유지비?
The heat pump is controlled by our Loxone smart home system which is also collecting energy usage information as we go through our first winter season (more on that in a future post).
So while we’re still gathering the data to compare the running costs with our last similar-sized house and its oil-fired boiler, for now we can say that comfort levels are a substantial improvement. The house feels so much warmer than the old place (and we’ve been down to -6° so far this winter) and the big tank is always full of hot water.
[UPDATE – here are the figures for our first years running cost]
Time to turn to Ryan Daly once much more for an explanation of heat pumps and much more on the system that keeps the Automated home warm in the winter.
Heat Pumps Explained
Air Source Heat Pumps work using similar technology as ground source heat pumps, but instead of having pipe work buried in the ground they use the outside air as its energy source.
In the UK and Ireland, the outside air temperature rarely goes below -3°C. The heat or energy moves from hot to cold (the 2nd law of thermodynamics) and the refrigerant in the heat pump boils at very low temperatures of -30°C, so the difference between the outside air and refrigerant creates the energy that flows into the heat pump. An Air source heat Pump uses a fan to draw the outside air across the evaporator.
An Air source heat Pump will have an efficiency rating of roughly 350% to 470% depending on system design and installation. In easy terms, this implies that for every 1kW of electrical power that the heat pump uses to power the compressor, which is the main component in the heat pump, it will get the remaining 2.5kW to 3.7kW of energy from the air outside.
In comparison a fossil fuel gas or oil boiler will only ever be 70% to 95% efficient. The lower the heating system operating temperature the much more efficient the heat pump will be and for that reason this will result in lower running costs.
Heat Pumps are an optimal fit for new build homes which have an Underfloor Heating System installed as the water running through the UF Heating pipe work is less than 35oC. The system is developed to be left running and will maintain a constant temperature in the home and will always have the hot water tank heated ensuring ample hot water for showering and bathing. In the summer when the heating is not required the heat pump can heat hot water separately.
At Daly we recommend all our clients to work closely with their architect in purchase that they specify low U-values and come up with an air tightness brief to make the house a low energy dwelling from the outset. In our experience, our systems work really well in wood frame houses as they are well insulated and air tight but they can also carry out as well in masonry houses as long as the air tightness steps are applied correctly on site.
In terms of capital cost an air source heat pump will cost roughly £2,000 to £3,000 much more to install over a conventional oil or gas boiler system. depending on fossil fuel prices, the payback compared to an oil boiler system will be between 3 to 6 years. The main difference in an oil boiler and a heat pump is the fact that a heat pump has an inverter compressor which implies it can match the exact heat load of the house. It does this by varying the frequency of the inverter. The smallest oil boiler available is 15kW and has a high temperature heat output which is not developed for an UF Heating System.
If using UF Heati오일이있는 NG, 혼합 밸브는 매니 폴드에 장착되어 있어야 시스템의 물 온도를 80OC에서 35OC로 감소시켜야합니다. 이로 인해 보일러 순환이 훨씬 더 일반적으로 운영 비용이 더 높아집니다. 매니 폴드에서 밸브를 혼합하면 UF 난방 시스템의 비용이 증가하고 시스템의 유지 보수 요구 사항도 추가됩니다. 히트 펌프를 사용하여 히트 펌프가 날씨 보상이라는 공정을 사용하여 UF 가열이 필요로하는 정확한 온도와 일치 할 수 있으므로 히트 펌프를 사용하여 UF 가열을 가열 할 때는 필요하지 않습니다.
날씨 보상은 히트 펌프 장치에 사전 배선 된 실외 센서를 사용합니다. 이것은 외부 온도에 따라 UF 가열을 통해 집으로가는 흐름 온도를 자동으로 조정합니다. 이 지능적인 운영은 히트 펌프가 온도가 낮은 날에 더 낮은 온도에서 작동하고 외부에서 차가워 질 때 강화 할 수 있으므로 운영 비용을 줄이는 데 도움이됩니다. 이렇게하면 실내 온도를 편안한 수준으로 지속적으로 유지하는 데 도움이됩니다.
히트 펌프가 설치된 주택 (현재 10 년 전으로 거슬러 올라가는)에서, 공기 소스 히트 펌프를 갖는 것과 관련된 일반적인 연간 난방 및 온수 비용은 연간 £ 350.00 – £ 700.00의 영역에있을 것임을 발견했습니다. 평균 3,000 평방 피트의 집. 이것은 히트 펌프에서 압축기를 작동시키는 전기 비용입니다. 오일 보일러 시스템과 비교할 때, 이것은 일반적으로 주택의 에너지 부하와 연료 가격에 따라 50-70% 저렴한 가격으로 작동합니다. 전력 가격은 유가보다 훨씬 안정적으로 유지되는 경향이 있으며, 귀하의 청구서는 매월마다 훨씬 동일 할 것이라는 사실을 알고있어 고객은 모든 필수 가족 예산을 사전 계획 할 수 있습니다. 일부 고객은 경제 7 관세를 설치하여 밤에 7 시간 동안 절반의 가격으로 전력을 차지하여 열 펌프 시스템을 운영하는 매우 저렴한 방법이 될 수 있습니다.
다른 주요 이점은 히트 펌프가 가진 이점입니다
낮은 운영 비용을 제외하고 가스 또는 석유 보일러를 통해
유해한 배출은 정기적 인 유지 보수가 필요하지 않으며 필요하지 않습니다.
전력을 사용하여 작동하기 위해 몇 개월마다 연료를 연료로 업.
또한 주택 소유자는 주택에 대한 하나의 공과금 만 가지고 있음을 의미합니다. 더
재생 가능한 공급원에서 오는 것보다 에너지, 우리는 아일랜드에서 열 펌프를 볼 수 있습니다.
그리고 영국은 미래 에너지 효율적인 난방 옵션의 일부이자 소포입니다.
하나는 스웨덴을 바라 볼 필요가 있습니다
모든 국내 주택의 80%가 이미 열 펌프로 가열되었습니다.
Daly에서 우리는 지난 7 년간 Hitachi Yutaki의 공기 소스 열 펌프를 공급하고 설치해 왔습니다. 그 기간에 수백 명을 설치 한 후 우리는 북 아일랜드에서 가장 중요한 히트 펌프 설치 프로그램이되었으며 그 기간에 제품에 대한 많은 지식을 구축했습니다. 이 부서에는 업계 최고의 보증 중 하나 인 7 년 부품 보증이 제공되며 제품 교육 과정을 수행하여 전체 판매 지원 서비스를 제공했습니다.
자세한 내용은 Dalyrenewables.com에 문의하십시오.
다음번
향후 2 부 포스트에서는 Loxone 시스템의 히트 펌프 제어 및 난방의 운영 비용을 살펴 보겠습니다. 그 동안 Instagram을 확인하여 프로젝트를 따르고 나머지 자동화 된 Home 2.0 블로그 메시지를 읽고 자체 건설에서 사용한 모든 제품에 대한 링크를 찾으십시오.
이 공유:
페이스 북
트위터
레딧
링크드 인
Pinterest37
이메일
더
whatsapp
인쇄
스카이프
텀블러
전보
포켓